2019-2023 Ford Ranger Pickup 2WD and 4WD - 1.5" Front and 1" Rear Lift Kit #101025

The Ford Ranger is a WORLD MARKET truck and this LIFT KIT kit works with the Canada/USA markets ONLY ~ we know for sure this kit will consistently kit work for vehicles Made in the USA and Canada with possible worldwide exceptions if your truck has the saem rear leaf spring combination the Canada/USA Rangers have...

For Rangers made in other markets, Mexico/SA/Australia/Brazil/Chile etc this kit will not work ~ the rear has different leaf spring options between markets and is not universal the same as the NA models - contact us if you have a world market truck as we are developing a kit for most markets

***This kit is for those Rangers that have the SQUARE UBOLT with the nuts facing the bottom of the truck and a single pin rear block/leaf spring center pin, if your world market truck has the same SQUARE Ubolts BUT you have a 2 pin rear block/leaf spring center pin- this kit will not work***

This Kit Fits:

2019-2023 Ford Ranger Pickup 2WD and 4WD

***This Truxxx 1.5" front leveling/1" rear lift kit is compatible with ALL 2019-2023 (see above)  Ford Ranger Pickup 2wd/4wd models - including the Tremor package**

This Truxxx 101025 leveling kit gives the owner of the Ford Ranger what they really want - room for bigger tires!

Seriously, bigger tires and new wheels are awesome, but if your on the practical side  I know you have already figured out that even with the stock wheel and tires you get more ground clearance and it won't be so easy to poke a hole in your oil pan or rip a CV boot or just generally destroy your brand new truck...you can even tell your wife you needed more ground clearance for the front bumper so it didn't drag in the snow, or through the mud, or on that dirt road you need to drive to the cabin...

See all the positives now? The leveling kit fixes the nose down stance and you get more ground clearance!

We have fit a range of tires, 32" tall tires can be fitted to 2wd trucks and 4x4's can fit up to 33" tall tires when using +25/+30mm offset aftermarket wheels....with the stock rims ( +45-50mm) watch your tire width as too wide may cause clearance issues with the upper control arm, going to a "0" offset or a "-" offset wheel will also need test fitting as too wide a tire may cause issues with the fender in turning - ALWAYS TEST FIT wheels and tires AFTER you have installed the kit!

All of our kits are a direct bolt in and require no modifications to your vehicle. These kits retain the stock ride quality of your truck.

Every Truxxx leveling kit is made with USA &CDN Mill Certified Steel and laser cut to precision tolerances using OEM drawings.

This kit contains two front strut spacers, all the required hardware and detailed instructions and complete alignment specs.

Recommended installation time is approx. 2-2.5 hours + an alignment and a 31.5-33” tall tire ( 285/70R17 or 285/60R18) are commonly used on a stock style offset wheel ( +25~+30mm)

• Designed to retain the stock ride quality! • Aftermarket shocks are NOT required! • Alignment specs included! •

***ALWAYS test fit wheels and tires AFTER lift install ~ test fit your tires and wheels after install as every tire and wheel manufacturer uses a different measuring tape! ***